U41629-J-Z156-2-76 Options Guide 45
RemoteView components RemoteView Service Board S2 LP
Figure 27: Connecting external cables
Ê Connect the external cables and the external power supply as shown in
figure 27 on page 45.
Ê Close the server, connect it to the power outlet, and switch it on as described
in the chapter “Completion” on page 67 et seqq..
1 connect to USB port of the server
2 connect to LAN port of the network
3 connect to VGA port of the server
4 connect to VGA port of the monitor
Externe Stromversorgung
External Power Supply
RSB S2 LP
Adapter
1
2
34
To Next Page
Loading...
