Fujitsu PRIMERGY TX150 S6 Service Supplement

TX150 S6 Service Supplement 41
Appendix Board layout
5.1.3 2.5“ SAS backplane
Part number: A3C40086493
You will find two 2.5“ SAS backplanes located on the hard disk cage.
The LEDs are made visible on the front side of the mounting frames via light
conductors, which are situated at the mounting frames of the drives. The
controlling of the LEDs does only work if a driver has been loaded. The signal
of the LEDs is described in the Operating Manual.
1 Connector power supply
2 Connector for SAS cable
1
2

Fujitsu PRIMERGY TX150 S6 Specifications

General

Brand	Fujitsu
Model	PRIMERGY TX150 S6
Category	Server
Language	English