Fujitsu PRIMERGY TX150 S7 - Page 9

TX150 S7 Operating Manual
Contents
7.4 Flickering stripes on monitor screen . . . . . . . . . . . . . 83
7.5 No screen display or display drifts . . . . . . . . . . . . . . 83
7.6 No mouse pointer displayed on screen . . . . . . . . . . . . 83
7.7 Incorrect date and time . . . . . . . . . . . . . . . . . . . . 84
7.8 Drives reported as “dead” when starting system . . . . . . 84
7.9 Added drive reported as defective . . . . . . . . . . . . . . 84
7.10 Error message on screen . . . . . . . . . . . . . . . . . . . 85
7.11 Expansion cards or onboard devices not recognized . . . . 85
7.12 Temperature warning . . . . . . . . . . . . . . . . . . . . . . 85
7.13 No effect of keyboard or mouse . . . . . . . . . . . . . . . . 85
7.14 Optical drive cannot read data . . . . . . . . . . . . . . . . 86
8 CSS components . . . . . . . . . . . . . . . . . . . . . . . . 87
8.1 Hot-plug components . . . . . . . . . . . . . . . . . . . . . 89
8.1.1 Hot-plug power supply units (optional) . . . . . . . . . . . . . 89
8.1.1.1 Replacing the hot-plug power supply unit . . . . . . . . . . 90
8.1.1.2 Adding a second hot-plug power supply unit . . . . . . . . . 91
8.1.2 Hot-plug HDD modules . . . . . . . . . . . . . . . . . . . . . 92
8.1.2.1 3.5-inch HDD module and dummy module . . . . . . . . . 94
8.1.2.2 2.5-inch HDD/SSD module and dummy module . . . . . . . 95
8.1.2.3 Handling hard disk drives and HDD modules . . . . . . . . 96
8.1.2.4 Floorstand: removing the hard disk cover . . . . . . . . . . 97
8.1.2.5 Removing/installing the dummy module . . . . . . . . . . . 98
8.1.2.6 Installing the HDD module . . . . . . . . . . . . . . . . . . 99
8.1.2.7 Removing the HDD module . . . . . . . . . . . . . . . . . 101
8.2 Non-hot-plug components . . . . . . . . . . . . . . . . . . . 102
8.2.1 Opening the server and identifying the defective
CSS component . . . . . . . . . . . . . . . . . . . . . . . . . 104
8.2.1.1 Opening the server . . . . . . . . . . . . . . . . . . . . . . 104
8.2.1.2 Identifying a CSS component . . . . . . . . . . . . . . . . 105
8.2.2 Replacing the system fan . . . . . . . . . . . . . . . . . . . . 106
8.2.3 Replacing a memory module . . . . . . . . . . . . . . . . . . 107
8.2.3.1 Removing a defective memory module . . . . . . . . . . . 107
8.2.3.2 Installing a new memory module . . . . . . . . . . . . . . . 108
8.2.4 Replacing an expansion card . . . . . . . . . . . . . . . . . . 109