Fujitsu PRIMERGY - Page 36

6
■ConnectionofSCSIdevice
1) Upto15SCSIdevicescanbeconnectedtothiscard.
2) TurnoffthepowertotheSCSIdevicestobeconnectedandremovethepower
cordfromtheoutlet.
3) SetuptheSCSIIDsandtheterminatorsofSCSIdevices.(Validatethe
terminatorsettingofSCSIdevicethatisconnectedattheendofSCSIcable.
TheninvalidatetheterminatorsettingsofotherSCSIdevices.)
4) ConnecttheconnectoroftheSCSIcabletotheSCSI68-pin16-bitconnectorof
thiscard.
5) ConnecttheconnectorattheotherendoftheSCSIcabletotheconnectorofthe
SCSIdevice.
6) ToconnectotherSCSIdevices,connecttheSCSIcablefromeachdevicetothe
previousdevice,andthealldevicesmustbeconnectedserially.