Fujitsu PRIMERGY - Configuring Two or more SCSI Cards

18
3.4ConfiguringTwoorMoreSCSICards
YoucanusetwoormoreSCSIchannelsbyinstallingadditionalSCSIcardsinthe
SERVER.InstallationandsetupareperformedinthesamewayaswhenoneSCSI
cardisinstalled.SomeSERVERrestrictthenumberofPCIbusslotsavailable.
WhenyouusetwoormoreSCSIcardsforaSERVER,notethepointsbelow.
・ WhenyouexecutetheSCSISelectutility,iftheutilityrecognizesthattwoor
moreSCSIcardsareusedintheSERVER,itdisplaysthePCIbusnumberand
PCIdevicenumberforeachSCSIcard.
Usethearrowkeys[↑]and[↓]toselectthePCIbusnumberanddevice
numberoftheSCSIcardwhosesettingistobechangedandpress[Enter]key.