EasyManuals Logo

Fujitsu SCANSNAP iX1400 User Manual

Fujitsu SCANSNAP iX1400
514 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #299 background imageLoading...
Page #299 background image
Documents to Scan (S1300i)
Conditions for documents that can be loaded into the ScanSnap are as follows:
Office Paper, Postcards, Business Cards
Document type Office paper, postcards, business cards
Paper weight
64 to 104.7 g/m
2
(17 to 20 lb)
Paper size Width: 50.8 to 216 mm (2 to 8.5 in.)
Length: 50.8 to 360 mm (2 to 14.17 in.)
l For long page (*1)
216 × 863 mm (8.5 × 34 in.)
*1: Scanning starts when you hold down the [Scan] button on the ScanSnap for 3 seconds or longer.
ATTENTION
The following types of documents must not be scanned:
l Documents attached with the metals such as paper clips or staples that can damage the inside of
the ScanSnap
Remove the metals for scanning.
l Documents on which the ink is still wet
Wait until the ink dries completely to scan these documents.
l Documents larger than width 216 mm (8.5 in.), length 863 mm (34 in.)
l Documents other than paper such as fabric, metal foil, OHP film, or plastic card
l Documents with photographs or memo papers attached
Documents that you need to treat with caution
l Documents written in pencil
When you scan documents written in pencil, there may be black traces left on them. Also, dirt
accumulating on the rollers may cause feeding errors. Clean the rollers occasionally when you
scan such documents. For details about how to perform cleaning, refer to "Troubleshooting" in
the ScanSnap Manager Help.
l Carbonless paper
Carbonless paper may contain chemicals that can harm the pad assy and the pick roller inside
the ScanSnap. Make sure to perform cleaning occasionally to maintain the scanner
performance when scanning carbonless paper. For details about how to perform cleaning,
refer to "Troubleshooting" in the ScanSnap Manager Help. Depending on the type of
carbonless paper, the life span of the scanner may be shortened compared to scanning office
paper.
l Scanning the following types of documents can result in documents being damaged or
scanned incorrectly.
- Documents smaller than width 50.8 mm (2 in.), length 50.8 mm (2 in.)
- Documents that weigh less than 64 g/m
2
(17 lb)
- Documents with an uneven surface (such as envelopes and paper sheets with attached
materials)
- Wrinkled or curled documents
Scanning Documents with S1300i
299

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu SCANSNAP iX1400 and is the answer not in the manual?

Fujitsu SCANSNAP iX1400 Specifications

General IconGeneral
Scanner typeADF scanner
Product colorBlack
Built-in displayNo
Color scanningYes
Maximum scan size216 x 360 mm
ADF scan speed (b/w, A4)600 ppm
Optical scanning resolution600 x 600 DPI
Minimum scan area (Flatbed)50.8 x 50.8 mm
ISO A-series sizes (A0...A9)A4, A5, A6
ISO B-series sizes (B0...B9)B5, B6
Scanning media types supportedBusiness Card, Post Card(JPN)
Maximum ISO A-series paper sizeA4
Auto Document Feeder (ADF) media weight0 - 80 g/m²
USB version2.0/3.2 Gen 1 (3.1 Gen 1)
USB connector typeUSB Type-B
Input voltage100 - 240 V
Power supply typeAC
AC input frequency50 - 60 Hz
Sensor typeColour CIS
Scan driversISIS, ScanSnap, TWAIN
Scan file formatsJPG, PDF
Daily duty cycle (max)- pages
Operating temperature (T-T)5 - 35 °C
Operating relative humidity (H-H)20 - 80 %
Standard input capacity50 sheets
Sustainability certificatesENERGY STAR, RoHS
CertificationCE, RoHS
Quantity per pack1 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth161 mm
Width292 mm
Height152 mm
Weight3200 g

Related product manuals