Fujitsu SCANSNAP iX1400 - Scansnap Setup Window

ScanSnap Setup Window
When you right-click the ScanSnap Manager icon in the notification area located at the far right
of the taskbar, and select [Scan Button Settings] from the "Right-Click Menu" (page 87), the
following ScanSnap setup window appears.
In the ScanSnap setup window, you can use the [Use Quick Menu] checkbox to specify whether or
not to use the Quick Menu. You can also use the profile buttons and detail setting tabs to specify
scan settings according to your scanning needs.
For details, refer to the ScanSnap Manager Help.
Profile Buttons
Detail Setting Tabs
Example: ScanSnap setup window for iX1600
HINT
For SV600, when SV600 and either iX1600, iX1500, iX1400, iX500, iX100, S1300i, or S1100i are
connected to a computer, you can change the scan settings for each of the ScanSnap models that are
connected by selecting the model name from [Scanner] on the ScanSnap setup window.
ScanSnap Setup Window
89