Fujitsu SCANSNAP iX1400 User Manual

Uninstalling the Software
Uninstall the software that is already installed.
The uninstallation procedure is as follows.
1. If the ScanSnap is connected to the computer, unplug the USB cable from
the computer.
2. Log on as a user with Administrator privileges.
3. If security software is running, stop it temporarily.
ATTENTION
If you cannot stop the security software, make sure that the setting on the security software is not
set to lock an application.
4. Uninstall the software.
The following software programs must be uninstalled:
l ScanSnap Manager
l ScanSnap Home
l ScanSnap Organizer
l CardMinder
For details, refer to "Uninstalling the Software" (page 497).
l If the software was successfully uninstalled, proceed to "Reinstalling the Software" (page 418).
l If the software still remains in the list, proceed to the next topic "Removing the Installation Information" (page
417).
If You Have Installed the Software Before
416

Fujitsu SCANSNAP iX1400 Specifications

General

Scanner type	ADF scanner
Product color	Black
Built-in display	No
Color scanning	Yes
Maximum scan size	216 x 360 mm
ADF scan speed (b/w, A4)	600 ppm
Optical scanning resolution	600 x 600 DPI
Minimum scan area (Flatbed)	50.8 x 50.8 mm
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Scanning media types supported	Business Card, Post Card(JPN)
Maximum ISO A-series paper size	A4
Auto Document Feeder (ADF) media weight	0 - 80 g/m²
USB version	2.0/3.2 Gen 1 (3.1 Gen 1)
USB connector type	USB Type-B
Input voltage	100 - 240 V
Power supply type	AC
AC input frequency	50 - 60 Hz
Sensor type	Colour CIS
Scan drivers	ISIS, ScanSnap, TWAIN
Scan file formats	JPG, PDF
Daily duty cycle (max)	- pages
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Standard input capacity	50 sheets
Sustainability certificates	ENERGY STAR, RoHS
Certification	CE, RoHS
Quantity per pack	1 pc(s)

Weight and Dimensions

Depth	161 mm
Width	292 mm
Height	152 mm
Weight	3200 g