EasyManuals Logo

Fujitsu SCANSNAP iX1400 User Manual

Fujitsu SCANSNAP iX1400
514 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #36 background imageLoading...
Page #36 background image
Setting Up SV600
Set up the ScanSnap so that it is ready to scan with ScanSnap Manager.
The following preparations are required before you set up the ScanSnap.
ATTENTION
Do not connect the ScanSnap to the computer before installing the software.
l Check that all items are included in the package
For details, refer to "Package List for SV600" (page 40).
HINT
When Getting Started is included in the package, refer to "Package List" in Getting Started.
l Remove the tape (1) and tape seal (2) from the ScanSnap
l Attach the extenders to the ScanSnap
ATTENTION
The following preparations are required before you attach the extenders.
- Wipe off dust and dirt such as oily dirt on the place where the extenders will be attached
- Peel the protective tape off the bottom of the extenders
Leaving about 3 to 5 mm of space between the extenders and the back and side of the
ScanSnap, push the extenders down until they lock in place. If the extenders are placed against
the side of the ScanSnap base or the protrusion of the extenders are placed on the ScanSnap
base, the bottom of the extenders may not stay in place firmly.
3 5mm
Setting Up SV600
36

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu SCANSNAP iX1400 and is the answer not in the manual?

Fujitsu SCANSNAP iX1400 Specifications

General IconGeneral
Scanner typeADF scanner
Product colorBlack
Built-in displayNo
Color scanningYes
Maximum scan size216 x 360 mm
ADF scan speed (b/w, A4)600 ppm
Optical scanning resolution600 x 600 DPI
Minimum scan area (Flatbed)50.8 x 50.8 mm
ISO A-series sizes (A0...A9)A4, A5, A6
ISO B-series sizes (B0...B9)B5, B6
Scanning media types supportedBusiness Card, Post Card(JPN)
Maximum ISO A-series paper sizeA4
Auto Document Feeder (ADF) media weight0 - 80 g/m²
USB version2.0/3.2 Gen 1 (3.1 Gen 1)
USB connector typeUSB Type-B
Input voltage100 - 240 V
Power supply typeAC
AC input frequency50 - 60 Hz
Sensor typeColour CIS
Scan driversISIS, ScanSnap, TWAIN
Scan file formatsJPG, PDF
Daily duty cycle (max)- pages
Operating temperature (T-T)5 - 35 °C
Operating relative humidity (H-H)20 - 80 %
Standard input capacity50 sheets
Sustainability certificatesENERGY STAR, RoHS
CertificationCE, RoHS
Quantity per pack1 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth161 mm
Width292 mm
Height152 mm
Weight3200 g

Related product manuals