EasyManuals Logo

Fujitsu SCANSNAP iX1400 User Manual

Fujitsu SCANSNAP iX1400
514 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #478 background imageLoading...
Page #478 background image
Replacing Consumables for iX500
The Roller Set consists of the brake roller and pick roller.
Replace each roller in the following procedure:
l Before replacing consumables, you must turn off the ScanSnap and unplug
the power cable from the AC outlet. Not doing so may cause fire or electrical
shock.
l Do not place internal parts such as the brake roller and the pick roller within
reach of small children. Doing so may cause injury.
ATTENTION
The bottom part of the ScanSnap may become hot when the ScanSnap is being used but this does not
affect ScanSnap operation or cause any physical harm. Be careful not to drop the ScanSnap when
carrying it.
1. Unplug the power cable from the AC outlet.
2. Remove any documents from the ADF paper chute (cover).
3. Pull the ADF release tab towards you to open the ADF top section.
ADF Paper Chute (Cover)
ADF Release Tab
ADF Top Section
4. Replace the brake roller.
1. Open the brake roller cover.
Hold both ends of the cover, and open it in the direction of the arrow.
Replacing Consumables for iX500
478

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu SCANSNAP iX1400 and is the answer not in the manual?

Fujitsu SCANSNAP iX1400 Specifications

General IconGeneral
Scanner typeADF scanner
Product colorBlack
Built-in displayNo
Color scanningYes
Maximum scan size216 x 360 mm
ADF scan speed (b/w, A4)600 ppm
Optical scanning resolution600 x 600 DPI
Minimum scan area (Flatbed)50.8 x 50.8 mm
ISO A-series sizes (A0...A9)A4, A5, A6
ISO B-series sizes (B0...B9)B5, B6
Scanning media types supportedBusiness Card, Post Card(JPN)
Maximum ISO A-series paper sizeA4
Auto Document Feeder (ADF) media weight0 - 80 g/m²
USB version2.0/3.2 Gen 1 (3.1 Gen 1)
USB connector typeUSB Type-B
Input voltage100 - 240 V
Power supply typeAC
AC input frequency50 - 60 Hz
Sensor typeColour CIS
Scan driversISIS, ScanSnap, TWAIN
Scan file formatsJPG, PDF
Daily duty cycle (max)- pages
Operating temperature (T-T)5 - 35 °C
Operating relative humidity (H-H)20 - 80 %
Standard input capacity50 sheets
Sustainability certificatesENERGY STAR, RoHS
CertificationCE, RoHS
Quantity per pack1 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth161 mm
Width292 mm
Height152 mm
Weight3200 g

Related product manuals