Example: iX1600
a It clicks when it returns to its original position.
8. Connect the power cable to the AC outlet, and turn on the ScanSnap.
9. Reset the Roller Set counter.
iX1600/iX1500
1. Press in the home screen on the touch panel to display the [Settings] screen.
2. Press to display the [Maintenance] screen.
3. Press [Check consumable status] to display the [Check consumable status] screen.
4. Press the [Reset] button.
5. When a message is displayed, press the [OK] button.
a The value of the current count for the [Current Count / Replacement Cycle] is set to "0".
iX1400
1. Right-click the ScanSnap Manager icon
in the notification area located at the far right
of the taskbar and select [Check consumable status] from the "Right-Click Menu" (page
87).
a The [ScanSnap Manager - Check consumable status] window appears.
2. Click the [Reset] button for [Roller Set Count].
a A confirmation window appears.
3. Click the [Yes] button.
a [Roller Set Count] is reset to 0.
Replacing Consumables for iX1600 / iX1500 / iX1400
477
To Next Page
Loading...
Need help?
General
Weight and Dimensions
