Fujitsu SCANSNAP iX1400 User Manual

Cannot Connect to the ScanSnap even after the
Installation Has Been Complete (iX1600 / iX1500)
If the ScanSnap Manager icon in the notification area is , configuring the settings of the
ScanSnap on the touch panel may not be complete.
Configure the settings of the ScanSnap by following the instructions on the touch panel.
1. Select a display language for the touch panel and press the [Next] button.
2. Select a startup mode on the [Startup Mode] screen and press the [Next]
button.
a The ScanSnap is connected to a computer and the ScanSnap Manager icon in the
notification area located at the far right of the taskbar changes from to .
Cannot Connect to the ScanSnap even after the Installation Has Been Complete (iX1600 / iX1500)
419

Fujitsu SCANSNAP iX1400 Specifications

General

Scanner type	ADF scanner
Product color	Black
Built-in display	No
Color scanning	Yes
Maximum scan size	216 x 360 mm
ADF scan speed (b/w, A4)	600 ppm
Optical scanning resolution	600 x 600 DPI
Minimum scan area (Flatbed)	50.8 x 50.8 mm
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Scanning media types supported	Business Card, Post Card(JPN)
Maximum ISO A-series paper size	A4
Auto Document Feeder (ADF) media weight	0 - 80 g/m²
USB version	2.0/3.2 Gen 1 (3.1 Gen 1)
USB connector type	USB Type-B
Input voltage	100 - 240 V
Power supply type	AC
AC input frequency	50 - 60 Hz
Sensor type	Colour CIS
Scan drivers	ISIS, ScanSnap, TWAIN
Scan file formats	JPG, PDF
Daily duty cycle (max)	- pages
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Standard input capacity	50 sheets
Sustainability certificates	ENERGY STAR, RoHS
Certification	CE, RoHS
Quantity per pack	1 pc(s)

Weight and Dimensions

Depth	161 mm
Width	292 mm
Height	152 mm
Weight	3200 g