EasyManuals Logo

Fujitsu SCANSNAP iX1400 User Manual

Fujitsu SCANSNAP iX1400
514 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #463 background imageLoading...
Page #463 background image
Feed Guide
Top Cover
Output Guide
3. Clean the following locations with a cloth moistened with Cleaner F1.
Glass (x 2) Idler Roller (x 12)
l Glass (× 2, one on the top cover and one on the opposite side)
Gently wipe the dirt and dust off the surface of the glass sections.
l Idler roller (× 12, located on the top cover)
Gently wipe the dirt and dust off the rollers as you rotate them manually. Be careful not
to damage the surface of the rollers. Make sure that they are cleaned properly because
residue on the rollers will affect the feeding performance.
2. Clean the feed rollers and eject rollers.
1. Connect the USB cable to the USB connector on the ScanSnap and the USB port on the
computer, and press the [Scan/Stop] button for three seconds with the top cover open.
ATTENTION
Connect the USB cable to the USB port on the computer only when cleaning the feed rollers
and eject rollers.
2. Clean the following locations with a cloth moistened with Cleaner F1.
Eject Roller (x 1)
Feed Roller (x 1)
l Feed roller (× 1, located on the scanner side)
Cleaning S1100i
463

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu SCANSNAP iX1400 and is the answer not in the manual?

Fujitsu SCANSNAP iX1400 Specifications

General IconGeneral
Scanner typeADF scanner
Product colorBlack
Built-in displayNo
Color scanningYes
Maximum scan size216 x 360 mm
ADF scan speed (b/w, A4)600 ppm
Optical scanning resolution600 x 600 DPI
Minimum scan area (Flatbed)50.8 x 50.8 mm
ISO A-series sizes (A0...A9)A4, A5, A6
ISO B-series sizes (B0...B9)B5, B6
Scanning media types supportedBusiness Card, Post Card(JPN)
Maximum ISO A-series paper sizeA4
Auto Document Feeder (ADF) media weight0 - 80 g/m²
USB version2.0/3.2 Gen 1 (3.1 Gen 1)
USB connector typeUSB Type-B
Input voltage100 - 240 V
Power supply typeAC
AC input frequency50 - 60 Hz
Sensor typeColour CIS
Scan driversISIS, ScanSnap, TWAIN
Scan file formatsJPG, PDF
Daily duty cycle (max)- pages
Operating temperature (T-T)5 - 35 °C
Operating relative humidity (H-H)20 - 80 %
Standard input capacity50 sheets
Sustainability certificatesENERGY STAR, RoHS
CertificationCE, RoHS
Quantity per pack1 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth161 mm
Width292 mm
Height152 mm
Weight3200 g

Related product manuals