EasyManuals Logo

Fujitsu SCANSNAP iX1400 User Manual

Fujitsu SCANSNAP iX1400
514 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #70 background imageLoading...
Page #70 background image
No. Name Description
7 [Scan] button (*1) Starts scanning. Can be pressed even when the stacker is closed.
Indicates the status of the ScanSnap as follows:
Blue (lit): Ready
Blue (flashing): Scanning
Orange (flashing): Error
8 Stacker Pull it out to use it.
Stacks up the ejected documents.
9 Receipt Guide Attach it to the ADF paper chute (cover) for it to be used.
If you use the Receipt Guide, you can place documents with different
widths such as receipts in it to scan them at the same time.
*1: When the ScanSnap has turned off automatically because of the automatic power off function,
perform the following to turn the ScanSnap back on.
l iX1600/iX1500
Press the touch panel, or close the ADF paper chute (cover) and open it again
l iX1400
Press the [Scan] button (this will not start scanning), or close the ADF paper chute (cover)
and open it again
For details, refer to "Automatic Power OFF (iX1600 / iX1500 / iX1400 / iX500 / iX100 / SV600 /
S1300i)" (page 100).
Back
10
11
12
13
No. Name Description
10 USB connector Slide the cover of the USB connector up to open it and then connect
the USB cable to the USB connector.
The cover of the USB connector slides up either one or two levels.
Open the cover according to the type of the USB cable you have.
l First level: USB 2.0 cable
l Second level: USB 3.0 cable
11 Power connector Used to connect a power cable.
12 Security cable slot Used to connect an anti-theft security cable (commercially available).
13 Ventilation port Holes for ventilating hot air from inside the ScanSnap.
Parts and Functions
70

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu SCANSNAP iX1400 and is the answer not in the manual?

Fujitsu SCANSNAP iX1400 Specifications

General IconGeneral
Scanner typeADF scanner
Product colorBlack
Built-in displayNo
Color scanningYes
Maximum scan size216 x 360 mm
ADF scan speed (b/w, A4)600 ppm
Optical scanning resolution600 x 600 DPI
Minimum scan area (Flatbed)50.8 x 50.8 mm
ISO A-series sizes (A0...A9)A4, A5, A6
ISO B-series sizes (B0...B9)B5, B6
Scanning media types supportedBusiness Card, Post Card(JPN)
Maximum ISO A-series paper sizeA4
Auto Document Feeder (ADF) media weight0 - 80 g/m²
USB version2.0/3.2 Gen 1 (3.1 Gen 1)
USB connector typeUSB Type-B
Input voltage100 - 240 V
Power supply typeAC
AC input frequency50 - 60 Hz
Sensor typeColour CIS
Scan driversISIS, ScanSnap, TWAIN
Scan file formatsJPG, PDF
Daily duty cycle (max)- pages
Operating temperature (T-T)5 - 35 °C
Operating relative humidity (H-H)20 - 80 %
Standard input capacity50 sheets
Sustainability certificatesENERGY STAR, RoHS
CertificationCE, RoHS
Quantity per pack1 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth161 mm
Width292 mm
Height152 mm
Weight3200 g

Related product manuals