EasyManuals Logo

Fujitsu ScanSnap iX1500 User Manual

Fujitsu ScanSnap iX1500
514 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #83 background imageLoading...
Page #83 background image
Charging the Battery (iX100)
The battery of the ScanSnap can be charged by connecting the ScanSnap and the computer with
the supplied USB cable.
Charge the ScanSnap's battery in the following procedure.
ATTENTION
l The ScanSnap is powered and charged through a USB port on a computer. Use the USB port that
provides a power supply of 500 mA to charge the battery.
l Use the supplied USB cable or the optional USB power adapter to charge the battery.
l Charge the battery in proper air temperature conditions (5 to 35 degrees C/41 to 95 degrees F).
l Do not charge the battery in the following cases:
- The shape of the USB cable plug was once deformed.
- The USB cable is damaged.
- Foreign objects get on the plugs of the USB cable and the USB connector which is on the
ScanSnap.
l Do not charge the battery in the following environments:
- Places which are subject to high humidity, dust, or vibration
- Places near conventional phones, televisions, or radios
l Check that the ScanSnap does not get wet before charging.
l The battery can be charged while the ScanSnap is being used. Although the following symptoms
may occur during a charge, it does not affect the ScanSnap in any way.
- It takes time until charging completes.
- The remaining battery power is reduced and charging is not completed.
- The ScanSnap is automatically turned off during a scan.
l The battery reaches the end of its life after 300 to 500 times of charges and discharges. The battery
life varies depending on the conditions that the ScanSnap is used in
l The battery naturally discharges over time even if it is not used.
l When you use the ScanSnap in low temperatures, the charged battery may run out quickly.
1. Connect the USB cable to the USB connector on the ScanSnap and the USB
port on the computer.
Charging the Battery (iX100)
83

Table of Contents

Other manuals for Fujitsu ScanSnap iX1500

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu ScanSnap iX1500 and is the answer not in the manual?

Fujitsu ScanSnap iX1500 Specifications

General IconGeneral
Color scanningYes
Maximum scan size216 x 3000 mm
ADF scan speed (color, A4)30 ppm
Optical scanning resolution600 x 600 DPI
Black/white scanning color modesGrayscale, Monochrome
DisplayTFT
Scanner typeADF + Manual feed scanner
Product colorWhite
Display diagonal4.3 \
Scan toCloud
Sensor typeDual CIS
Scan driversScanSnap
Daily duty cycle (max)- pages
Auto document feeder (ADF) input capacity50 sheets
Maximum scan length3000 mm
Card thickness (max)0.76 mm
ISO A-series sizes (A0...A9)A3, A4
ISO B-series sizes (B0...B9)B4
Scanning media types supportedPlain paper
Maximum ISO A-series paper sizeA3
Cables includedAC, USB
PC connectionUSB 3.2 Gen 1 (3.1 Gen 1)
Sustainability certificatesRoHS, ENERGY STAR
Operating temperature (T-T)5 - 35 °C
Operating relative humidity (H-H)20 - 80 %
Mac operating systems supportedMac OS X 10.12 Sierra, Mac OS X 10.13 High Sierra
Windows operating systems supportedWindows 10, Windows 10 Education, Windows 10 Education x64, Windows 10 Enterprise, Windows 10 Enterprise x64, Windows 10 Home, Windows 10 Home x64, Windows 10 IOT Core, Windows 10 Pro, Windows 10 Pro x64, Windows 7, Windows 7 Enterprise, Windows 7 Enterprise x64, Windows 7 Home Basic, Windows 7 Home Basic x64, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows 7 x64, Windows 8.1, Windows 8.1 Enterprise, Windows 8.1 Enterprise x64, Windows 8.1 Pro, Windows 8.1 Pro x64, Windows 8.1 x64
Wi-Fi standards802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Security algorithms64-bit WEP, 128-bit WEP, WPA, WPA-AES, WPA-TKIP, WPA2, WPA2-AES, WPA2-PSK, WPA2-TKIP
Input voltage100 - 240 V
Power supply typeAC
AC input frequency50 - 60 Hz
Power consumption (sleep)1.6 W
Power consumption (typical)17 W
USB version3.2 Gen 2 (3.1 Gen 2)
Frequency band2.4/5 GHz GHz
USB connector typeUSB Type-B
Standard interfacesUSB 1.1, USB 2.0, USB 3.2 Gen 1 (3.1 Gen 1), Wireless LAN
Harmonized System (HS) code84716070
Weight and Dimensions IconWeight and Dimensions
Depth161 mm
Width292 mm
Height152 mm
Weight3400 g

Related product manuals