Consumables
This section explains about the consumable part numbers, replacement cycles and how to replace
the consumables.
l Before replacing consumables, you must turn off the ScanSnap and unplug
the power cable from the AC outlet. Not doing so may cause fire or electrical
shock.
l Do not place internal parts such as the brake roller and the pick roller within
reach of small children. Doing so may cause injury.
ATTENTION
The bottom part of the ScanSnap may become hot when the ScanSnap is being used but this does not
affect ScanSnap operation or cause any physical harm. Be careful not to drop the ScanSnap when
carrying it.
l "Part Numbers and Replacement Cycle of Consumables" (page 126)
l "Checking the Status of Consumables" (page 127)
l "Replacing Consumables" (page 128)
Consumables
125
To Next Page
Loading...
