Specifications of Wireless LAN
The following table summarizes the wireless LAN specifications of the ScanSnap.
Item Specification
Model name iX500
Observed standards IEEE802.11b/IEEE802.11g/IEEE802.11n
Frequency range 2.412 GHz to 2.472 GHz
Channels 1 to 13 ch
Transfer speed (standard) IEEE802.11b Max.: 11 Mbps
IEEE802.11g Max.: 54 Mbps
IEEE802.11n Max.: 72.2 Mbps (Only supports 20 MHz bandwidth) (*1)
Communication mode Infrastructure mode (*2)
Communication distance (line
of sight)
Indoors, 50 m (Recommended: indoors, within 25 m) (*3)
Security WPA-PSK (TKIP/AES), WPA2-PSK (TKIP/AES), WPA (TKIP/AES), WPA2
(TKIP/AES), WEP (64-bit/128-bit)
Easy installation WPS 2.0 supported (button/PIN code) (*4)
*1: The values indicated on these standards are the maximum value, and do not indicate actual
communication speed.
*2: To use the wireless function, you need a wireless access point that supports the same
standards.
*3: The specifications may vary based on the connected wireless access point and the surrounding
environment.
*4: You need a wireless access point that supports the WPS function.
Specifications of Wireless LAN
139
To Next Page
Loading...
