Fujitsu ScanSnap iX500

System Requirements
The ScanSnap has the following system requirements.
For the latest information on requirements, please visit the ScanSnap Support Site at:
http://scansnap.fujitsu.com/g-support/en/
Operating system Windows 10 (32-bit/64-bit) (*1)
Windows 8.1 (32-bit/64-bit) (*1)
Windows 8 (32-bit/64-bit) (*1)
Windows 7 (32-bit/64-bit)
Windows Vista (32-bit/64-bit) (*2)
Windows XP (32-bit) (*3)
CPU
Intel
®
Core
™
i5 2.5 GHz or higher
Memory 4 GB or more
Display resolution (*4) Windows 10/Windows 8.1/Windows 8: 1024 × 768 pixels or higher
Windows 7/Windows Vista/Windows XP: 800 × 600 pixels or higher
Disk space Free space required to install the software bundled with the ScanSnap is as
follows: (*5)
l ScanSnap Manager: 700 MB
l ScanSnap Organizer: 670 MB
l CardMinder: 660 MB
l ABBYY FineReader for ScanSnap: 620 MB
l ScanSnap Online Update: 10 MB
l Scan to Microsoft SharePoint: 40 MB
l ScanSnap iX500 Basic Operation Guide: 10 MB
USB port USB 3.0(*6)/USB 2.0/USB 1.1
*1: The software bundled with the ScanSnap operates as a desktop application.
*2: Service Pack 2 or later is required.
*3: Service Pack 3 or later is required.
*4: When the font size is large, some screens may not be displayed correctly.
In such a case, use a smaller font size.
*5: To save scanned images, more free space is required.
For details about estimated image data size, refer to the ScanSnap Manager Help.
*6: When the ScanSnap is connected to a USB 3.0 port, the ScanSnap may not be recognized by
some computers.
For the latest USB 3.0 information, refer to the ScanSnap Support Site (http://
scansnap.fujitsu.com/g-support/en/).
ATTENTION
l If the system requirements above are not satisfied, the ScanSnap may not operate.
l If a USB port on the keyboard or on the monitor is in use, the ScanSnap may not operate.
l When using a commercially available USB hub, use a type that is powered from an electrical power
supply (and that comes with an adapter).
l Scanning speed decreases in the following cases:
- The CPU or the memory does not meet the recommended specifications.
- The version of the USB port or the USB hub is USB 1.1.
System Requirements
38