Scanning Documents of Different Widths or
Lengths in One Batch
Documents of different widths or lengths can be scanned in one batch.
For details about documents that can be scanned, refer to "Documents That Can Be Loaded Directly
into the ScanSnap" (page 61).
1. Open the ADF paper chute (cover) of the ScanSnap.
a The [Scan] button flashes in blue. The button returns to being lit normally when document
scanning is enabled.
In addition, the ScanSnap Manager icon in the notification area located at the far right of
the taskbar changes from
to .
2. Pull the stacker towards you.
3. Depending on documents to scan, pull out the extension on the ADF paper chute (cover) and
open the stacker.
Scanning Documents of Different Widths or Lengths in One Batch
29
To Next Page
Loading...
