8
2.1.2. Installing ABBYY FineReader for
ScanSnap
Please prepare the ABBYY FineReader CD-ROM.
1. Insert the "ABBYY FineReader CD-ROM" into the
CD drive.
The "ABBYY FineReader for ScanSnap" screen appears.
• If Windows XP Service Pack 2 is installed
in your computer, you may see the
following dialog box when inserting the
CD-ROM described above. Click the [Yes]
button to show the “ABBYY FineReader
for ScanSnap” screen.
If the [In the future, do not show this message.]
checkbox is marked, you will not see this window
when inserting a CD-ROM that attempts to
connect to Microsoft Internet Explorer in the
future.
• You may see [Information Bar] below instead of
the message above. If so, first, click the [OK]
button and then the yellow part with a warning for
options. Next, select [Allow Blocked Content]
from the menu.
• Finally, click the [Yes] button on the [Security
Warning] dialog to proceed.
2. Click [Install>] to proceed with installation.
The “ABBYY FineReader for ScanSnap” window
may not be displayed when the “Autorun” setting on
your CD drive is disabled. In this case, run
“autorun.exe” in this CD-ROM directly using
“Explore” or “My computer.”
The file folder containing the setup.exe file appears.
3. Double-click the [Setup.exe] icon.
4. Select the language for this installation and click
[OK].
The InstallShield Wizard for ABBYY FineReader for
ScanSnap appears.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
