Fujitsu ScanSnap S510 Getting Started Guide

28
12. Close the ADF.
You should hear the ADF click when it returns to its
original position.
13. Turn on the scanner.
 ScanSnap Manager icon changes from to .
14. Right-click the "ScanSnap Manager" icon on the
task bar, and select [Check consumable supplies]
from the menu.
15. In the "Check consumable status" window, click the
[Reset] button of the Pick Roller Count.
6.4. Purchasing the Carrier Sheet
If the "Carrier Sheet" bundled in this product cannot be
used for scanning due to damage or wear-and-tear, you can
purchase just the Carrier Sheet separately.
As a guideline, it is recommended to replace the Carrier
Sheet every 500 scans.
However, the number of times of use differs according to
usage. If scratches and dirt are conspicuous, please replace
the Carrier Sheet accordingly.
The description of the Carrier Sheet and part number are as
follows:
Description Qty P/N
ScanSnap Carrier Sheet 5 pcs FI-511ES-WW
S
ADF
S

Fujitsu ScanSnap S510 Specifications

General

Film scanning	No
Color scanning	Yes
Input color depth	- bit
Maximum scan size	216 x 356 mm
Scanner type	Sheet-fed scanner
Sensor type	CCD
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Auto document feeder (ADF) input capacity	50 sheets
USB version	2.0
Standard interfaces	USB 2.0
Minimum storage drive space	512 MB
Minimum system requirements	Windows 2000/ XP/ Vista
Sustainability certificates	ENERGY STAR
Power requirements	AC 100V to 240V, 50 / 60 Hz
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Certification	RoHS

Weight and Dimensions

Weight	2700 g