Fujitsu ScanSnap S510 Getting Started Guide

ScanSnap S510 Getting Started | 11
3) Click the [Continue Anyway] button. .
The window to notify completion of installation appears.
4) Click the [Finish] button.
The ScanSnap is added to your computer as new
hardware.
For Windows Vista
1) When "Found New Hardware" window appears, Select
"Locate and install driver software (recommended)".
2) On the "User Account Control" window, click the
[Continue] button.
3) On the "Windows Security" window, select "Install this
driver software anyway".
The ScanSnap is added to your computer as new
hardware.
The installation of ScanSnap is complete!
The "ScanSnap Manager" icon in the task bar is
displayed as .
When the icon remains as
, press the
[POWER] button to turn off the scanner and then
press the [POWER] button again to restart the
scanner. (Allow at least 5 seconds when you turn
on/off the scanner.)
S

Fujitsu ScanSnap S510 Specifications

General

Film scanning	No
Color scanning	Yes
Input color depth	- bit
Maximum scan size	216 x 356 mm
Scanner type	Sheet-fed scanner
Sensor type	CCD
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Auto document feeder (ADF) input capacity	50 sheets
USB version	2.0
Standard interfaces	USB 2.0
Minimum storage drive space	512 MB
Minimum system requirements	Windows 2000/ XP/ Vista
Sustainability certificates	ENERGY STAR
Power requirements	AC 100V to 240V, 50 / 60 Hz
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Certification	RoHS

Weight and Dimensions

Weight	2700 g