5 User Interface
1. Reboot the management station.
2. In the ServerView Operations Manager open
the Configuration applet .
3. Click Change Configuration.
4. In the Start step, select Use existing Repos-
itory.
5. Enable option Repository on Network Drive.
6. Enter User and Password.
Important:
Do not open any other applets before finishing these
steps.
Test Connectivity
Tests the connection to the system in the network
For Linux:
After each reboot the remote drive must be mounted manually
by an administrator beforehand.
//<absolute pathname>
The mount point itself and the directories above must
have read / execute access for user svuser.
186 ServerView Update Management
To Next Page
Loading...