4 Installing ServerView Update Agents
To find out which servers are supported and which system components can
be updated with the various update procedures please refer to the relevant
files on the ServerView Suite DVD 1 under ServerView Suite – Software
Products - ServerView – Maintenance & Update - Update (Supported
Systems and Info columns).
The ServerView Update Agent needs around 3 minutes to start up com-
pletely.
4.1 Installation on the managed server
4.1.1 Requirements for installation
l Installation sequence:
Install ServerView agents before ServerView Update Agent.
l For an online update only a functioning LAN connection is required.
l For an Update via TFTP Server refer to section "Installation on the
TFTP server" on page 51.
The following difference exist with regard to the components to be updat-
ed via the TFTP server:
In the case of autonomous hardware systems on which no Windows,
Linux or DOS operating system runs (e.g. management blades) it is not
necessary to install the update agent on the managed system.
Management blades and connection blades are always updated via
a TFTP server.
ServerView Update Management 43
To Next Page
Loading...