Fujitsu ServerView Operations Manager V6.12 - Cancel (Event); Sequenceerror (Event)

Error.2=0
ErrorText.2=ERROR[0] faultless
execution
7.1.7.3 Cancel (Event)
Event.0=Cancel
Event: Cancel
Error.0=0
Error number in the event
of an error
ErrorText.0=ERROR[0] faultless
execution
Description of the return
value
7.1.7.4 SequenceError (Event)
This event has no sub-events. This event indicates that a command cannot
be executed because Update Manager has an incorrect status.
Examples
l An update status should not exist when StartFlash is called.
l Cleanup is only possible if the status is READY.
l Cancel (without parameter -S) is only possible if the status is PRE-
PARED.
Event.0=SequenceError
A command was called during the wrong
phase (unauthorized update status).
ServerView Update Management 243
7.1 GFCLI (Command-Line Interface)