4.1.3 Installing Update Agent V6.0 (or later)
4.1.3.1 Installation under Windows
The following procedures are available for installation:
l Menu-Driven Installation (FTASetup.exe)
l Installation via the Command Line Interface
l Installation via ASP (Autonomous Support Package), SV Update Agent
>=V5.50
Menu-driven Installation (FTASetup.exe)
Update agent version 4.91 and higher is only installed if the server is online-
update-capable, i.e. online tools for updating the firmware are available. Older
systems are not supported as of Update Management V6.0.
You start the installation via the FTASetup.exe file, which you will find on the
ServerView Suite DVD 1 under SVSSoft-
ware\Software\ServerView\Windows\GlobalFlash\Agents\OnlineFlash.
Start the menu-driven installation as follows:
1. Double-click the FTASetup.exe file.
2. Confirm the license conditions.
3. Define the parameters for the security settings.
ServerView Update Management 45
4.1 Installation on the managed server
To Next Page
Loading...