7.1.3 WaitForDone (Command)
Syntax
GFCLI -W -N <system> [-F <results file>]
[-M -T <IP-addr>]
[-B –Z <IP-addr> -T <IP-addr>]
[-E -T <IPaddr> -Y <inventory>]
Description
WaitForDone returns a return value of 0, 4, 8 or 9 if all update jobs have
been processed (with or without errors).
In contrast to the Cleanup command, the update results are not deleted on
the managed server when this command is executed. You can execute Wait-
ForDone more than once, and the results file will be updated each time.
If a connection cannot be established, the command returns a timeout after a
maximum of 60 seconds. In this case, you can execute the command again
to query the status.
ServerView Update Management 231
7.1 GFCLI (Command-Line Interface)
To Next Page
Loading...