7 Command-Line Interface
rem ********************************************************
rem * Old Flashs (ready) detected CleanUp them
rem *******************************************************
rem
:old-ok
@echo.
@echo Flash States "ready"(without errors) for server %1 available
rem
:old-nok
@echo.
@echo Flash States "ready"(with errors) for server %1 available
goto cleanall
rem
:cleanall
@echo Who has started them ? Please check!
@echo After continue the old flashs are reseted
pause
@echo CleanUp flash states for server %1
gfcli -C -N %1 -L %2 -P %3 -F %1.txt
if %errorlevel%==1 goto nothtodo
if %errorlevel%==2 goto timeout
if %errorlevel%==3 goto statenok
if %errorlevel%==4 goto c-oldnok
if %errorlevel%==5 goto gfierror
if %errorlevel%==6 goto nologop
if %errorlevel%==7 goto noaccess
if %errorlevel%==10 goto parerror
if %errorlevel%==11 goto memerror
if %errorlevel%==0 goto c-oldok
@echo.
@echo Undefined returncode!
goto chkend
rem
:c-oldok
@echo.
@echo CleanUP - Jobs detected all ok
goto start1
rem
250 ServerView Update Management
To Next Page