4 Installing ServerView Update Agents
TraceFile=<file>
File in which the agent’s actions are logged when TraceLevel > 0.
The directory must exist if given in <file>.
Default file name: /opt/SMAW/SMAWgfa/data/gf_agent.log
TraceLevel=<n>
n = 0 (no tracing)
n = 2 (tracing of errors)
n = 3 (tracing of the commands)
n = 5 (detailed tracing)
Default TraceLevel = 2
Parameter changes only become effective after the /etc/init.d/globalflash
restart command has been executed.
In the case of an update installation the default values are assigned to
the existing configuration values.
Uninstallation under Linux
Uninstallation is performed using the rpm -e SMAWgfa command.
50 ServerView Update Management
To Next Page
Loading...