2-8 SPARC Enterprise M3000 Server Installation Guide • January 2009
2.3 Requirements for Server Installation
The following items and information are required for installing the server. Prepare
them before installation.
■ Screwdriver, Phillips No. 2
Used for mounting the server on the rack
■ Wrist strap
Used to prevent static electricity from the human body from damaging the server
■ Conductive mat
■ Ethernet cable of category 5 or higher
■ Administration console
Obtain one of the following from the customer:
■ ASCII terminal
■ Workstation
■ Terminal server (or a patch panel connected to a terminal server)
■ Personal computer (PC)
■ XSCF unit configuration information (IP address, subnet mask, default gateway,
etc.)
■ Domain configuration information (IP address, subnet mask, default gateway,
etc.)
■ Circuit tester
Used to check the input AC voltage
To Next Page
Loading...
Need help?
General