Fujitsu SPARC Enterprise M3000 Installation Guide

Appendix B Troubleshooting B-7
Example of showhardconf -u command execution
B.3.2 Using the showlogs Command
The showlogs command displays the contents of the specified log in order of
timestamp. The displayed contents begin from the oldest date. The showlogs
command displays the following logs:
■ Error log
■ Power log
■ Event log
■ Temperature and humidity record
■ Monitoring message log
■ Console message log
■ Panic message log
■ IPL message log
XSCF> showhardconf -u
SPARC Enterprise M3000; Memory_Size:8 GB;
+-----------------------------------+------------+
| FRU | Quantity |
+-----------------------------------+------------+
| MBU_A | 1 |
| CPU | ( 1) |
| Freq:2.520 GHz; | ( 1) |
| MEM | 8 |
| Type:1A; Size:1 GB; | ( 8) |
| OPNL | 1 |
| PSU | 2 |
| FANBP_B | 1 |
| FAN_A | 2 |
+-----------------------------------+------------+
XSCF>

Fujitsu SPARC Enterprise M3000 Specifications

General

Brand	Fujitsu
Model	SPARC Enterprise M3000
Category	Server
Language	English