vi SPARC Enterprise M3000 Server Installation Guide • January 2009
3.3.3 Connecting the Administration Console 3–4
3.4 Setting and Checking the Required Information for the Server 3–6
3.4.1 Logging in to the XSCF Shell 3–7
3.4.2 Initializing the XSCF Unit 3–9
3.5 Powering On the Server 3–10
3.5.1 Verifying the Configuration 3–11
3.5.2 Checking the Dual-Power Feed 3–12
3.6 Connecting Additional Peripheral Devices 3–13
4. Connecting the Domain to the Network 4–1
4.1 Network Configuration Overview 4–1
4.2 Connecting to the Network 4–2
4.3 Verifying the Network Connection 4–3
4.4 Starting the Solaris Operating System 4–3
4.5 Verifying Operation by Running SunVTS 4–4
A. Server Views A–1
A.1 The Server Views A–1
A.2 Operator Panel Overview A–4
B. Troubleshooting B–1
B.1 Corrective Actions to Common Problems B–1
B.2 Emergency Power Off B–2
B.3 Using Status Commands B–3
B.3.1 Using the showhardconf Command B–4
B.3.1.1 showhardconf -u Command B–6
B.3.2 Using the showlogs Command B–7
B.3.3 Using the showstatus Command B–8
B.3.4 Using the fmdump Command B–9
B.3.4.1 fmdump -V Command B–9
To Next Page
Loading...
Need help?
General