Fujitsu Stylistic M532 User Guide

27 - Using the optional cradle
2 If connected, remove the AC adapter cable from the DC In connector on the rear of the cradle base (Figure 16).
3 Position the tablet so that the docking connector on the bottom of the unit is aligned with the docking
connector on the cradle base (Figure 15).
4 Push the tablet onto the cradle in the direction of the arrow until it engages with the plug.
5 Plug the AC adapter into the DC In connector on the rear of the cradle.
6 Plug the AC adapter cable into an AC socket.
Figure 15. Connecting the tablet to the cradle Figure 16. Powering the tablet with the cradle
Docking
Connector
AC Adapter
DC In

Fujitsu Stylistic M532 Specifications

General

Brand	Fujitsu
Model	Stylistic M532
Category	Tablet
Language	English