Security functions
Password protection for booting the operating system
With the supervisor password you have set in the B IOS Setup Utility (see
section "
Assigning the supervisor and user passwords", Page 56), you can
also prevent booting of the operating system.
Operating system
Activating system protection
► Start the BIOS Setup Utility and go to the Security menu.
Operatingsystem
► Select the Password on Boot option and press the Enter key.
► Select the option you require (Disabled, First Boot or Every Boot) and press the enter key
If Disabled is selected, a password is not required, and you cannot protect
the system (deactivates system protection).
► Select the Save Chang
es & Exit option under Exit.
The Tablet PC reboots. You will be prompted to enter your password (the supervisor password).
Deactivating syst
em protection
► Start the BIOS Setup Utility and go to the Security menu.
Operatingsyste
m
► Select the Passw
ord on Boot option and press the Enter key.
► Select the Disabled option and press the Enter key.
Ifyoudonotwan
t to change any other settings, you can exit BIOS Setup Utility.
► Select the Save Changes & Exit option under Exit.
The Tablet PC r
eboots. The system is no longer password-protected.
58 Fujitsu
To Next Page
Loading...
