Full Gauge Controls RCK-862 plus User Manual

12.SUMMARY SCREEN
12.1. Group summary screen:
Displays the basic status of the lines (Suction and/or Discharge) that make up the group, if configured. By default, the RCK-862 plus is configured
with Suction 01 and Discharge 01 in Group 01. If the Group is not configured, access the Main Menu Function Settings Groups. For more zz xx
information see section 18. Main Menu Function 1.1.1ddd
: Indicates the current date
:Reports current time
Displays the number of suction pressure switches
configured for the group.
If there is no suction enabled, an empty line will
display.
Group identification on display:
Gr1: Group 1;
Gr2: Group 2;
Gr3: Group 3.
: Indication of active alarm
DD/MM
HH:MM:SS
Suction:
#1 10.0 psi On
#2 20.0 psi On
#3 30.0 psi On
Discharge:
#1 310.0 psi Al M
Gr1 DD/MM HH:MM:SS
1 2
3
4
5
7
8
6
1
2
3
4
5
6
7
8
Auxiliary indications:
M: At least 1 compressor or fan in maintenance
Eco: When the economy setpoint is active
Pd: In the process of Pump Down
FLT: Active floating condensation
ADI: Active adiabatic condensation
Note: When more than one auxiliary function is
active on the same line (Suction or Discharge),
the icons will alternate on the display.
Indication of control status:
Wait: Waiting for control to start
On: Turn On
Off: Turn Off
Lock: Locked
Al: In alarm or automatic reset
Al (Blinking): Waiting for manual reset
C f g : Abs e nce of any con f ig u rat i on
parameter.
Displays the discharge pressure switch configured
for the group. If there is no discharge enable, an
empty line will display.
Note: The group number determines the number
of the discharge line that will be used. For
example, discharge 03 will only be used in group
03.
11

Full Gauge Controls RCK-862 plus Specifications

General

Brand	Full Gauge Controls
Model	RCK-862 plus
Category	Controller
Language	English