2. WIRING
2-13
Procedure to extract contact pin
When a contact pin has been inserted into an incorrect hole on the connector housing,
remove it by using the pin extractor.
1. Push the pin extractor into the pin hole from the side opposite to the pin inserting side.
2. Firmly push in the head of the pin extractor. The retaining spring will come free and
contact pin can be removed.
Pin extractor
Clamping cable
Secure the cable with cable clamp at the shield and armor.
Cable clamp
Shield and armor
Anticorrosive sheath
Clamping cable
2.4.2 Other connections
Remote
controller
NMEA1
CIF1
NMEA2
CIF2
E/S
Gyro
(AD converter)
Speed log/current indicator
Transceiver unit
External KP
Control unit
Display 2
Display 1
Speaker
Ground
Connection of processor unit
To Next Page
Loading...
