3. ADJUSTMENT
3-6
PORT 1 BAUDRATE, PORT 2 BAUDRATE
Set baud rate of equipment connected to NMEA1/CIF1 or NMEA2/CIF2 port, among 2400,
4800, 9600 and 19200 (bps).
1. Rotate the [RANGE] control to select PORT 1 BAUDRATE or PORT 2 BAUDRATE
appropliately.
2. Rotate the [GAIN] control to choose item among 2400, 4800, 9600 and 19200.
PORT 1 FORMAT, PORT 2 FORMAT
Set format of equipment connected to NMEA1/CIF1 port or NMEA2/CIF2 port.
1. Rotate the [RANGE] control to select PORT 1 FORMAT or PORT 2 FORMAT
appropriately.
2. Rotate the [GAIN] control to choose NMEA or CIF depending on the equipment
connected.
NAV DATA
Choose source of nav data among GPS, LC (Loran C), DR (Dead Reckoning) or ALL. “ALL”
automatically chooses source in the order of GPS, Loran C and dead reckoning. (Priority:
GPS>LC>DR)
1. Rotate the [RANGE] control to select NAV DATA.
2. Rotate the [GAIN] control to choose item appropriately.
Select “DR” when using the equipment connected to GYRO port and LOG port.
To Next Page
Loading...
