13
1.6 Terminal box (option)
The terminal box forms a joint among the display unit, digital indicator, distance indicator and
distribution box. Two digital indicators/distance indicators may be connected by installing an
additional terminal box as follows.
• A magnetic compass will be affected if the terminal box is too close. Observe the compass
safe distances to prevent disturbance to the magnetic compass.
Distribution box
Digital indicator/
Distance indicator
(option)
Terminal box
(option)
Terminal box
(option)
Digital indicator/
Distance indicator
(option)
Wiring with terminal box
Tighten four tapping screws (5X25) so there is 5 mm clearance between bottom of screw head
and bulkhead, and screw slots of the unit with the tapping screws tightened.
1.7 Digital Indicator, Distance Indicator (option)
The digital indicator and distance indicator use the same housing as the display unit.
Refer to the section 1.2 Display Unit for mounting instructions.
To Next Page
Loading...
