Furuno DS-80 - DECLARATION OF CONFORMITY; MARINE EQUIPMENT CERTIFICATION

32
KCP Board (65P6020)
S1-#6
Turn on/off flashing of the indication “STW” when the thermistor value is abnormal.
DIP switch S1-#6 OFF ON
“STW” flashing No flashing Flashing (default setting)
Note: S1 #1 - #5, #7, #8 should remain OFF, the default setting.
S1
ON
OFF
KCP Board (65P6020)
DIP Switch S1
Transceiver unit DS-810