Furuno DS-80 - JPW Board (65 P6010); Distribution Box DS-801; DIP Switch S4 Settings

31
Power switch: Upper
Set to OFF.
Distribution box DS-801
ON
OFF
R100
R145
R96
R87
R40R29
R36
R27
3.7 DIP Switch Settings
JPW Board (65P6010)
S4-#6
The default setting (OFF) outputs only sentences VBW and VLW of all NMEA sentences input.
DIP switch S4-#6 setting OFF ON
Output NMEA sentences VBW, VLW All NMEA sentences
S4-#8
Select whether to output or don't output the distance run pulse if an error occurs, when
DOPPLER is selected at SPD DATA in the SYSTEM MENU.
DIP switch S4-#8 OFF ON
Distance run pulse Output stopped Output not stopped
Note: S4 #1-#5, #7, S2 #3, #4 should remain OFF, the default setting.
JPW Board (65P6010)
S4
Distribution box, cover removed