28
Setting of language
The display language can be selected for English or Japanese.
1. Press the [MENU] key to display the main menu.
2. Select SYSTEM MENU 2 and press the [ENT] key to display the system menu 2.
3. Select LANG. And press the [ENT] key to display the language pop-up menu.
ENGLISH
Language pop-up window
4. Select ENGLISH or JAPANESE with
#
or
$
key.
5. Press the [ENT] key.
6. Press the [MENU] key twice to close the menu.
3.3 Checking the Interconnection
After installation the equipment do the following to confirm if the doppler speed signal is being
output correctly.
1. Press the [MENU] key to display the main menu.
2. Select DEMO, and press the [ENT] key to display the demo menu.
DEMO
+10.0 kt
SPEED
DATA DISPLAY OFF
ENT
SET
DEMO MODE menu
3. Select SPEED.
4. Press the [ENT] key.
5. Use the cursor pad to enter the speed value desired.
#$
: Change value, +/-
!"
: Change digit
6. Press the [ENT] key.
To Next Page
Loading...
