EasyManua.ls Logo

Furuno GP-7000F - Replacing the Fuse; Replacing the Internal Battery

Furuno GP-7000F
142 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11. MAINTENANCE & TROUBLESHOOTING
11-2
11.2 Replacement of Fuse
The fuse on the power cable protects the system from reverse polarity of the ship's
mains and equipment fault. If the fuse blows, find the cause before replacing it. Use
only a 3A fuse. Using the wrong fuse will damage the unit and void the warranty.
11.3 Replacement of Battery
A battery installed on the circuit board inside the display unit preserves data when the
power is turned off. The life of the battery is about three years. When the battery volt-
age is low the battery icon ( ) appears on the display. When this happens, contact
your dealer to request replacement of the battery.
Note: If you require data currently displayed, save it to a SD memory card before re-
placing the battery.
Name Type Code No.
Fuse
FGBO-A 3A AC125V 000-549-063
FGBO-A 125V 3A PBF 000-155-850-10
Name Type Code No.
Battery CR2477/1HF 000-150-460-10
Use the correct fuse.
Use of a wrong fuse can cause fire or
damage the equipment.
CAUTION
Be sure the battery is inserted correctly.
Wrong polarity may cause an explosion.
WARNING
www.reelschematic.com
www.reelschematic.com

Table of Contents

Other manuals for Furuno GP-7000F

Related product manuals