7-1
7. ALARMS
The plotter section has seven conditions which generate both audio and visual alarms:
arrival, XTE, temperature, depth, anchor, STW and grounding alarms. When an alarm
is violated both audio and visual alarms are released. You may silence the audio alarm
with the [CLEAR] key. The visual alarm remains on the screen until the offending
alarm is deactivated or the reason for the alarm has disappeared.
You may set up the alarms on the ALARM menu.
1. Press the [MENU] key to show the menu bar.
Menu bar
2. Rotate the [ENTER] knob to choose ALARMS and then push the [ENTER] knob to
show the ALARMS menu.
Alarms menu
Menu Bar
GENERAL PLOTTER MAP ALARMS ADVANCED INFO FIND
AUDIBLE ALARM Off
ARRIVAL ALARM Off
XTE ALARM Off
TEMPERATURE ALARM Off
DEPTH ALARM Off
ANCHOR ALARM Off
STW ALARM Off
GROUNDING ALARM Off
GROUNDING ALARM RANGE 0.25 nm
GROUNDING ALARM REPORT
FISH ALARM Off
FISH ALARM (B/L) Off
www.reelschematic.com
www.reelschematic.com
To Next Page
Loading...
