5. ROUTE
5-4
5.4 Inserting Waypoints
Waypoints can be inserted in a route as follows:
Inserting a waypoint from the route list
1. Show the route list.
2. Press the cursor pad (S T) to choose a route.
3. Rotate the [ENTER] knob to choose EDIT at the bottom of screen and then push
the [ENTER] knob to show the route menu.
Route menu
4. Press the cursor pad (S T) to place the cursor at the location where you want to
insert a waypoint.
5. Rotate the [ENTER] knob to choose the waypoint you want to insert. (You can
search for a waypoint by the SORT or SEARCH function.)
6. Push the [ENTER] knob to enter the waypoint.
7. Press the SAVE soft key to close the route menu.
8. Press the [CLEAR] key to close the route list.
CANCEL
COORD TYPE
SAVE
1
34 41.895 ’N
135 21.109 ’W
34 43.776 ’N
135 17.883 ’W
34 46.007 ’N
135 19.521 ’W
34 80.398 ’N
135 35.354 ’W
34 28.361 ’N
135 49.239 ’W
34 24.242 ’N
135 46.753 ’W
LEG
ROUTE NAME:0001RT______
COMMENT : 17:33_ JUL1003
SKIP
00 73WP______
14:09_APR0403
0001WP______
09:21_JAN1903
NISHINOMIYA_
10:34_JAN1903
0008WP______
15:07_JAN1903
0018WP______
16:49_APR0103
0022WP______
11:12_APR0603
Route name and
comment
Range between two waypoints
Push [MENU] key to execute.
SORT SEARCH
DELETE
www.reelschematic.com
www.reelschematic.com
To Next Page
Loading...
