Furuno GP-7000F - Navigation Data Display

2. PLOTTER DISPLAYS
2-5
2.4 Navigation Data Display
The navigation data display provides generic navigation data, and it is shown in com-
bination displays.
Appropriate sensors are required. Bars (- -) appear when corresponding sensor is not
connected.
Navigation data display
Changing the information displayed
1. Press and hold the [MENU] key down for two seconds to show Speed in reverse
video.
2. Rotate the [ENTER] knob to show data in reverse video.
3. Press the [ENTER] knob to show the selection window as shown below.
4. Rotate the [ENTER] knob to choose the data to show, and then press it.
The item window (ex. units) appears.
5. Rotate [ENTER] knob to select the unit.
The data selected at step 2 changes to your selection.
6. Press the [CLEAR] key to erase the reverse video.
LATITUDE
22º
03
.7
30
N
LONGITUDE
1
3
7º
5
7.
8
7
0
E
SOG
12.0KTS
COG
7
º
M
TRIP
111.5 nm
TEMP
10.3
º
F
TIME
12:2
8
AM
DATE
A
p
r/17/04
DEPTH
22.5 Ft
Position
Trip meter
Speed
Course
Depth
Temperature
SOG
COG
STW
HDG
DST
BRG
TRIP
DEPTH
TEMP
HDOP
VDOP
XTE
DRF
SET
WST
WDT
WSA
WDA
DATE
TIME
TTG
ETA
DEST
Note: Contents may be changed
depending on data selected at step2.
www.reelschematic.com
www.reelschematic.com