1. OPERATIONAL OVERVIEW
1-7
1.7.2 Deleting the MOB mark
1. Operate the cursor pad to place the cursor on the MOB mark, and then press the
STOP soft key to cancel the navigation to the MOB mark.
2. Press the DELETE soft key to show the confirmation window.
3. Choose "YES", and then press the [ENTER] knob to delete the MOB mark.
The color of MOB mark changes to blue. After changing the range, the MOB mark
is cleared completely.
1.8 Menu Operation
Most operations are carried out from the menu bar. The menu bar is opened or closed
with the [MENU] key. Menus and options may be selected by rotating the [ENTER]
knob or operating the cursor pad. However, this manual describes operating proce-
dure using the [ENTER] knob.
Using the [ENTER] knob
1. Press the [MENU] key to show the menu bar.
Menu bar
2. Rotate the [ENTER] knob to choose a menu title and then push the [ENTER] knob
to show the menu.
For example, choose GENERAL to display the GENERAL menu.
General menu
3. Rotate the [ENTER] knob to choose an item and then push the [ENTER] knob.
For example, choose LANGUAGE.
Menu Bar
GENERAL PLOTTER MAP ALARMS ADVANCED INFO FIND
LANGUAGE English
KEYPAD BEEP Off
PALETTE Normal
TIME LINE Infinite
TIME REFERENCE UTC
TIME FORMAT 12hour
DATE FORMAT MM-DD-YY
AUTO INFO On All
SHIP ICON
SHIP OFFSET Off
WIND GRAPH True
UNITS OF MEASURE
www.reelschematic.com
www.reelschematic.com
To Next Page
Loading...
