Furuno GP-7000F - Track Plotting Interval; Erasing Track

3. TRACK
3-4
3.6.2 Track plotting interval
1. Choose TRACK from the PLOTTER menu.
2. Choose DISTANCE or TIME as appropriate and then push the [ENTER] knob.
Interval windows
3. Rotate the [ENTER] knob to select setting.
4. Push the [ENTER] knob.
5. Press the [MENU] key to close the menu.
3.7 Erasing Track
This section shows you how to erase the active track.
1. Choose TRACK from the PLOTTER menu.
2. Choose DELETE and then push the [ENTER] knob.
Delete window
3. Push the [ENTER] knob to erase the track.
To cancel, rotate the [ENTER] knob to choose NO and then push the [ENTER]
knob.
4. Press the [MENU] key.
0.01
0.05
0.1
0.5
1.0
2.0
5.0
10.0
1sec
5 sec
10 sec
30 sec
1 min
5 min
10 min
30 min
1 h
Distance window Time window
WARNING
Delete Track
Are you sure?
YES NO
www.reelschematic.com
www.reelschematic.com