Furuno GP-7000F - Page 130

12. AIS OPERATION
12-4
Activating CPA/TCPA alarm
To activate CPA/TCPA alarm you set, do the following.
1. Choose AIS SETUP from the ADVANCED menu and then push the [ENTER]
knob.
2. Rotate the [ENTER] knob to choose CPA ALARM or TCPA ALARM appropriately
and then push the [ENTER] knob.
3. Rotate the [ENTER] knob to choose On and then push the [ENTER] knob.
4. Press the [MENU] key to close the menu.
www.reelschematic.com
www.reelschematic.com