1. OPERATIONAL OVERVIEW
1-10
13.Push the [ENTER] knob to move the own ship mark on the cursor.
14.Press the [CLEAR] key.
Echo sounder
1. Press the [MENU] key to show the menu bar on the plotter display.
2. Rotate the [ENTER] knob to choose ADVANCE and then push the [ENTER] knob.
3. Rotate the [ENTER] knob to choose ECHO SOUNDER SIMULATION and then
push the [ENTER] knob.
4. Rotate the [ENTER] knob to choose On and then push the [ENTER] knob.
5. Press the [MENU] key to close the menu.
6. Choose the sounder display on the display mode screen.
www.reelschematic.com
www.reelschematic.com
To Next Page
Loading...
