10. VIDEO SOUNDER OPERATION
10-3
1. Press the [DISP] key to show the DISPLAY MODE menu.
Display mode menu
2. Rotate the ENTER knob to choose the icon.
3. Push the [ENTER] knob.
Selecting transmission frequency
The single frequency display shows either the 50k picture or 200k picture. To select
transmission frequency, do one of the following:
Using the soft key
Press the 50/200 kHz soft key to choose the frequency.
Through the menu
1. Press the [MENU] key to show the menu bar.
Menu bar
2. Rotate the [ENTER] knob to choose SOUNDER and then push the [ENTER] knob
to show the SOUNDER menu.
DISPLAY MODE
TURN KNOB TO SELECT DISPLAY MODE AND PRESS KNOB TO ENTER.
Menu Bar
GENERAL SOUNDER SENSITIVITY ALARMS RANGES
www.reelschematic.com
www.reelschematic.com
To Next Page
Loading...
